DIPRA SPID'O TR 50 Manual De Instrucciones Original página 13

FEATURES / DETAILS
Suction port
1
Suction line
2
Check valve (non-return valve)
3
Intake filter
4
Pressure port
5
Nozzle
6
Pump housing
7
Hose clamp
8
Venting operation
9
Closure of venting port
10
Pressure line
11
HA : Suction head (between the surface of water and the
pump).
HI : Difference between surface of the liquid to be pumped and
entrance of the suction line (min 0,3 m)
Dear customer,
Congratulation for buying your new device from
SPIDO
Like all our products, this one, too, was developed
using the latest technological knowledge. The device
was manufactured and assembled on the basis
of state-of-the-art pump technology using most
reliable electrical or electronic components which
ensure a high level of quality and a long life of your
new product.
Please read through these operating instructions
carefully to make sure that you can fully benefit from
all features. Some explanatory illustrations can be
found at the end of these operating instructions.
We hope you will enjoy your new device!
TABLE OF CONTENTS
1. General safety information
2. Range of use
3. Technical Data
4. Scope of delivery
5. Installation
6. Electrical connection
7. Putting into operation
8. Maintenance and troubleshooting
9. Warranty
10. How to order spare parts
11. Service
GB