Publicidad
Idiomas disponibles
Idiomas disponibles
Quick operation guide
O R I G I N A L
4. USER INSTRUCTIONS.
4.1 - Place the lift on its working position,
in a firm, flat surface. Remove the exten-
sible bar (EX-034B) from the leg.
4.2 - Firstly, untighten the red knob (B) of
the bracket and put the extension bar (EX-
034B) in it, tighten the red knob (B) again
to fix the bar. Then remove the safety po-
sition blocking lock (R) of the leg support
system (SA) and untighten the retainer
knob (K). Lower the support system (SA)
until you can fix the bloking lock (R) in the
required position, then tighten the black
knob (K).
4.3 - THE MAXIMUM LOAD IS 125 Kg
(275 lb). The lift should NEVER be over-
loaded (over 125 Kg). Safety at work is
the most important issue. Untighten the
screw of the EX-034B and place the load
onto the lift using an adequate support ac-
cording to the need, use so that the weight
of the load will only elevate in a vertical di-
rection. The minimum load to activate the
brake is 25 Kg.
4.4 - Elevation: Turn the winch crank
1
clockwise (N
) to lift the tower, the red
ALS lock enable the lift to rise and auto-
matically block the profiles whilst rising,
ensuring that it will never fall.
4.5 - Blocking: Once the system is eleva-
PRO LIFTS S.L.
3.17 - Only original replacement parts should be used.
ted to its required height, gently turn the
handle in a anti-clockwise (N
introduce the ALS locks in its correspon-
ding hole and block the profiles. The ALS
lock will take the pressure of the load and
release strain applied on the cable.
Security system ALS
The TE-034 incorporates the patented
security system ALS (Automatic Lock
Security). This VMB red trigger system
automatically blocks the tower in the posi-
tion it is left in. Each section of lift has an
ALS that blocks the section in the unlikely
event of the cable breaking.
4.6 - Lowering: To bring the lift down you
need to first turn the winch handle slightly
clockwise (N
the red ALS lock out. This releases the
blocking systems. Then turn the handle
anti-clockwise (N
the ALS lock pulled out until the profile
has been completely lowered. All red ALS
locks should be pulled out one by one
whilst the handle is turned anti-clockwise
and the profiles are brought down, one by
one.
CAUTION
When two towers are used to elevate a
bridge, down truss or many towers to ele-
vate a structure of any type, it is almost
Depósito legal y copyright . Todos los derechos reservados.
ENGLISH
2
) direction to
1
) and at the same time pull
2
), whilst maintaining
8
Publicidad
