Vortice 10912 Manual De Instrucciones página 52

ENGLISH
The "PROGRAM" page allows you to assign up to 6 time intervals with different speeds, including equipment shut-down.
Press the [▲] or [▼] key multiple times to scroll all the intervals.
NOTE
The time bands of MON / FRI or SAT / SUN overwrite the single days, during the setting change first the general time
bands, and then set the daily ones. If they are subsequently changed again, the MON / FRI and SAT / SUN bands will
overwrite the daily ones.
NOTE
At the specified intervals, however, the speeds can be changed manually in the "HOME" page, in that case: the message
"Prg" will flash for 30 minutes after which it will return to work at the speed set in the hourly programming, if during the 30
min any other function that modifies the speed intervenes, the 30 min count is reset.
"INFO" page
Select the "Info" line and press the [] key on the "MAIN MENU" page.
The "Info" page contains the following information from top to bottom:
• User interface firmware version;
• Electronic control board firmware version.
MAIN MENU
52
...
...
...