About Water Leakage
Stop shooting immediately if the Waterproof
Case leaks. If you use the camera in this state,
this may cause a fire or electric shocks. Never
use it in this state. Thoroughly wipe the
Waterproof Case interior and the camera dry.
Please contact your Canon Customer Support
Help Desk.
6
Waterproof Seal
• Debris (e.g. sand, dirt or hair) stuck to the
waterproof seal may cause water leakage.
Catching a single strand of hair or a tiny grain
of sand in the seal can cause leaks.
• When removing the seal from your
Waterproof Case, use your fingers so you
do not damage the waterproof seal (as
shown in Fig. 1). Do not dig your fingernails
into it or use pointed or metallic objects to
remove it.
• Do not pull the waterproof seal. Pulling the
seal may overstretch it, which may cause
the case to not close properly and cause
leaks.
• While mounting the waterproof seal, do not
twist or pull the seal with force. Extreme
care should be taken to ensure the
waterproof seal is level around the mounting
groove. Please check to ensure that the
waterproof seal is working.