Canon WP-DC28 Guia Del Usuario página 33

Shooting when the mode dial is set to
, , or
You can set the white balance to
(Underwater) using the FUNC. menu for the
above modes. Please note that you can set
the white balance manually with the press of
a single button if you assign the
(Custom White Balance 1 or 2) function to the
button. This is recommended for adjusting
the white balance to the shooting conditions.
4
Use the LCD monitor to compose
the shot. Press the shutter button
halfway and wait until the upper
indicator lights green or orange.
After it lights, press the shutter
button all the way.
• Make sure that the lens window is always
clean.
• Ensure that your fingers and wrist strap do
not obstruct the lens window, flash or
diffusion plate when shooting.
14
• If the power saving function activates and shuts
,
off the power, press the power button again.
• You cannot shoot images using the viewfinder.
Using the Control Dial
Using the control dial with the waterproof case
or
differs slightly from that of the camera itself.
1. When you want to turn the control dial
clockwise, press the
pressing the
2. When you want to turn the control dial
counterclockwise, press the
while pressing the
5
When you have finished using the
camera, turn the camera off.
button while
button.
button
button.