hafele Dialock DTSH Instrucciones De Montaje página 51

Drill holes on interior side of door
Fig. 18
Drill the fixing holes at both sides
as far as the middle of the door leaf
using the 8 mm drill bit.
Fig. 20
Fig. 21
Dialock Door Terminals DTSH, DTSH FH - Status: 07.2008 - 732.29.134
Fig. 19
Drill 13 mm hole at both sides for
cable connection.
Cut out the coupling area.
25 mm router
cutter
Spacer
Note:
Cutting only required on the exterior
side.
25 mm router
cutter
Spacer
Installation Instructions
Do not damage mortise
lock with router cutter.
Slide the spacer onto the
journal of the router cut-
ter to prevent damage.
(Fig. 20, 21)
51