GE WSLP1500 Manual Del Propietario E Instalación página 18

Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
WSLP1500-- ONE-FAUCET CONNECTIONS (CONT.)
_] MAKE SURE THE TEMPERATURE
SELECTOR IS SET AT COLD
[] SLOWLY TURN ON THE WATER
FAUCET ALL THE WAY TO THE
DESIRED TEMPERATURE SETTING
_] PLUG THE POWER CORD INTO A
3-PRONG GROUNDED OUTLET
The electrical power cord is on the back of the
washer.
z'C.'
Ensure proper ground
exists before use
1
r9] REMOVE THE PROTECTIVE FILM
COVERING THE CONTROL PANEL
IT0]INSTALLATION CH ECKLIST
Before starting the washer, check to make sure:
CI Main power is turned on.
CI The washer is plugged in.
CI The water faucets are turned on.
The unit is level.
There are no leaks at the faucet drain line
or washer.
18