GE WSLP1500 Manual Del Propietario E Instalación página 20

Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
WSLP1500--TWO-FAUCET CONNECTIONS
If you have two separate water connections, your washer
can be connected to both the hot and cold water faucets.
This kit can be purchased from your dealer or from Parts
and Accessories. In the United States, call 800.626.2002.
In Canada, consult the yellow pages for your local Mabe
Canada number.
TO CONNECT THE WASHER:
[_] CONNECT TO WATER LINE
Connect HOT and COLD water inlet hoses to the
HOT and COLD faucets.
_]CONNECT DRAIN HOSE
Secure the drain hose to the sink or stand pipe.
Sink
Cable
Tie
Cable
Tie
Stand Pipe
[]PLUG THE POWER CORD INTO A
3-PRONG GROUNDED OUTLET
Ensure proper ground
exists before use
1
i
[-4-] I NSTALLATION CH ECKLIST
Before starting the washer, check to make sure:
E_Main power is turned on.
The washer is plugged in.
The water faucets are turned on.
The unit is level.
I_ The drain hose is properly tied up.
I_ There are no leaks at the faucet, drain line
or washer.
TO DISCONNECT THE WASHER:
j[_ TURN WATER FAUCETS OFF
i
[Z]UNPLUG POWER CORD AND
RETURN IT TO THE STORAGE AREA
i-_ DISCONNECT THE DRAIN AND
WATER SUPPLY HOSES
Hang them on the storage rack.
20