Keysight U1241B Guía Del Usuario Y Servicios página 37

Press
at T1T2
(U1242B)
position to
enable T2
function
If you are working in a varied environment, where ambient temperature is not
constant, do the following:
1 Press
2 Avoid contact between the thermocouple probe and the measurement surface.
3 After a constant reading is obtained, press
4 Touch the measurement surface with the thermocouple probe.
5 Read the display for the relative temperature.
The T2 temperature measurement is only available for U1242B.
NOTE
Keysight U1241B and U1242B User's and Service Guide
for more than one second to enable 0 °C compensation. This
function allows a quick measurement of the relative temperature.
relative reference temperature.
Features and Functions
Measuring tips:
– Clean the measurement surface
and remember to disable the
applied power.
– When measuring temperature,
move the thermocouple along the
surface until you get the highest/
lowest temperature reading.
– For quick measurement, use the
0 °C compensation to see the
temperature variation of the
thermocouple sensor. The 0 °C
compensation assists you in
measuring relative temperature.
to set the reading as the
2
37