Publicidad
Idiomas disponibles
Idiomas disponibles
Dress properly. Do not wear loose
f)
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts .
If devices are provided for the
g)
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce dust-
related hazards .
Power tool use and care
Do not force the power tool. Use
a)
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed .
Do not use the power tool if the
b)
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired .
Disconnect the plug from the
c)
power source and/or the battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally .
Store idle power tools out of
d)
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions to
operate the power tool. Power tools
are dangerous in the hands of untrained
users .
Maintain power tools. Check for
e)
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect
the power tool's operation. If
damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained power
tools .
Keep cutting tools sharp and clean.
f)
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control .
Use the power tool, accessories
g)
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations different
from those intended could result in a
hazardous situation .
Service
Have your power tool serviced
a)
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the power
tool is maintained .
˜ Safety instructions for all
applications
General safety instructions for
grinding, sandpaper sanding, working
with wire brushes, polishing, milling
and abrasive cutting:
This power tool is intended for use
a)
as a grinder, sandpaper sander,
wire brush, polisher, milling
machine and abrasive cutting
appliance. Please follow all safety
instructions, instructions, diagrams and data
that you receive with the appliance . If you
do not observe the following instructions,
this can lead to electrical shock, fire and/or
serious injuries .
GB/IE
29
Publicidad
