Publicidad
MANUAL CLOCK SETTING
Make sure
...
• Use the remote control for this procedure.
• TVA^CR power must be turned on.
In the example below, the clock is to be set to:
DATE
March 1st, 1999
SETTING TIME
5:40PM
1
Select "SETTING CLOCK"
Press the MENU button.
Press the PLAY/A or STOP/T
button to point to "SETTING
CLOCK".
Then, press the F.FWD/^ button.
2
Select "MANUAL CLOCK SET"
Press the PLAY/A or STOP/T
button to point to "MANUAL
CLOCK SET".
Then, press the F.FWD^ button.
3
Select the month
Press the PLAY/A or STOP/T
button until your desired month
appears.
(Example: March
03)
Then, press the F.FWD^ button.
4
Select the day
Press the PLAY/A or STOP/T
button until your desired day
appears. (Example: 1st -» 01)
Then, press the F.FWD^ button.
5
Select the year
Press the PLAY/A or STOP/T
button until your desired year
appears. (Example: 1999)
Then, press the F.FWD/^ button.
6
Select the hour
Press the PLAY/A or STOP/T
button until your desired hour
appears. (Example: 5, PM)
Then, press the F.FWD/^ button.
7
Select the minute
Press the PLAY/A or STOP/T
button until the desired minute
appears. (Example: 40)
8
start the clock
Press the MENU button.
Although seconds are not dis¬
played, they begin counting from
00 when you press the MENU
button. Use this feature to
synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 30 seconds, you may have to reset
the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Follow steps [1] and [2].
2) Select where you want to change using the
F.FWD/^ or REW/-^ button.
3) Enter correct numbers using the PLAY/A or
STOP/T button.
4) Press the MENU button to start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on your
cable system, select "AUTO CLOCK" and press the
F.FWD/^ or REW/^ button to turn [OFF] tois func¬
tion. Then you can manually adjust the clock.
-
15
-
EN
8H30
Publicidad
