Publicidad
SPECIAL PLAYBACK
Make sure
...
• Use the remote control for this procedure.
• TVA^CR power must be turned on.
• Insert a prerecorded tape.
• Before playback, follow steps below.
RENTAL PLAYBACK
This function enables you to improve the picture quality
when playing back worn cassettes such as rented tapes.
1
Select "USER'S SET UP"
Press the MENU button.
Press the PLAY/A or STOP/V
button to point to "USER'S SET
UP".
Then, press the RFWD^ button.
2
Set "RENTAL" to [ON]
Press the PLAY/A or STOP/T
button to point to "RENTAL".
Press the F.FWD/^ or REW/^
button until [ON] appears.
3 Exit the Rental setting
Press the MENU button to return to the TV mode.
4
start playback
Press the PLAY button to start playback. "RENTAL
PLAY^" appears.
• Once you select the Rental mode, it stays in effect
even after you turn off the TVA^CR.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/^ or REW/-^ button on the remote control.
Press the MENU button to return to TV mode.
If there is a power failure of any kind, the unit will
retain it's memory for this feature.
ALTO REPEAT PI.AYBACK
The TVA^CR has the auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.
ALL REPEAT: Repeat playback from the beginning to
the end of the tape.
BLANK REPEAT: Repeat playback from the beginning
to a blank part, which is blank for more than 10
seconds.
1
Select "USER'S SET UP"
Press the MENU button.
Press the PLAY/A or STOP/T
button to point to "USER'S SET
UP".
Then, press the F.FWD/^ button.
2
Select "ALL" or "BLANK"
Press the PLAY/A or STOP/T button to point to
"REPEAT PLAY".
Press the F.FWD/^ or REW/^
button repeatedly until your
desired selection [ALL] or
[BLANK] appears.
3
Exit the Repeat Play setting
Press the MENU button to return to the TV mode.
4
Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY ►" appears.
• Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
• If the Rental mode is set [ON], the "RENTAL
PLAY^" display has priority.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/^ or REW/^ button on the remote control.
Press the MENU button to return to TV mode.
If there is a power failure of any kind, the unit will
retain it's memory for this feature.
- M E N U -
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SETUP
USER'S SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
(
-
USER'S SET UP -
^
►
RENTAL
REPEAT PLAY
AUTO RETURN
V._J
C
\
- M E N U -
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
►
USER'S SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
- USER'S SET UP -
RENTAL
►
REPEAT PLAY
AUTO RETURN
-
20
-
EN
8H30
Publicidad
