Publicidad
3
Set wake up time
Press the PLAY/A or STOP/T
button until to point to "TIME".
Press the F.FWD/^ or REW/^
button until your desired wake
up time appears.
Each additional push will
increase (or decrease) the time by 10 minutes.
4
Exit the Wake Up Timer setting
Press the MENU button to return to TV mode.
TO CANCEL THE WAKE UP TIMER
Repeat step [1] but select [OFF].
SLEEP TIMER
The Sleep Timer function turns off the TVA^CR without
using the POWER button after a desired period of time.
NOTE:
• This function does not operate during Recording
mode.
1
Select "SLEEP TIMER"
Press the WAKE UP/SLEEP button on the remote con¬
trol until "SLEEP TIMER" appears.
^ Set sleep time
Press the PLAY/A, STOP/T,
F.FWD/^ or REW/*^ button
until your
desired sleep time appears.
Each additional push will increase the time by 30
minutes up to 120 minutes.
Press the MENU button to exit the Sleep Timer setting.
TO CANCEL THE SLEEP TIMER
Press the WAKE UP/SLEEP button on the remote
control until "SLEEP TIMER" appears.
Then, press the PLAY/A, STOP/T, F.FWD/^ or
REW/*^ button and select [OFF].
To view the time ieft for sleep timer press the WAKE
UP/SLEEP button twice then the MENU button to exit
the sleep timer setting.
WAKE UP
ON/OFF
[OM
TIMER
TV/TAPE
►TIME
«ijl2:0QM.., ,
jLxS-J
SLEEP TIMER
[2:00]
MAINTENANCE
CABINET CLEANING
• Wipe the front panel and other exterior surfaces of
the TV/VCR with a soft cloth immersed in lukewarm
water and wrung dry.
• Never use a solvent or alcohol. Do not spray
insecticide liquid near the TV/VCR. Such chemicals
may cause damage and discoloration to the exposed
surfaces.
HEAD CLEANING
•
Playback picture may become blurred of inteirupted
while the TV program reception is clear. Dirt accumu¬
lated on the video heads after long periods of use, or the
usage of rental or worn tapes can cause this problem.
If a streaky or snowy picture appears during play¬
back, the video heads in your TV/VCR may need to
be cleaned.
1. Please visit your local Audio/Video store and pur¬
chase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line at 1-800-242-7158, to locate
an Authorized Service Center.
NOTES:
• Remember to read the instructions included with the
video head cleaner before use.
• Clean video heads only when problems occur.
SERVICING
•
Should your TV/V CR become inoperative, do not try
to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord, and please call our help line at 1-800-
242-7158, to locate an Authorized Service Center.
-
27
-
EN
8H30
Publicidad
