Publicidad
- REAR VIEW - [Fig.3]
7 F.FWD button- Press to rapidly advance the tape, or
to view the picture rapidly in forward during
playback mode. (Forward Search)
► button-
• When setting program (for example: setting clock or
timer program), press to determine your selection
and proceed to the next step you want to input.
• Press to determine setting modes from on screen
menu.
• Press to select a mode from a particular menu.
(for example: LANGUAGE or USER'S SET UP)
8 REC button- Press for manual recording.
OTR button—Activates One Touch Recording,
(only on the TVA^CR)
9 RECORD indicator- Flashes during recording.
Lights up in the Stand-by mode for Timer Recording.
10 Remote Sensor Window- Receives the infrared
signals from the remote control.
11 CHANNEL A / T buttons-Press to select the de¬
sired channels for viewing or recording.
TRACKING function-Press to minimize video
'noise' (lines or dots on screen) during playback
mode. (See page 19.)
12 VOLUMEa /
V
buttons- Adjust the volume level.
13 POWER button- Press to turn TVA^CR on and off.
Press to activate timer recording.
14 Cassette compartment
15 Number buttons- Press to select desired channels
for viewing or recording. To select channels from 1
to 9, first press the 0 button and then 1 to 9.
+100 button- When selecting cable channels which
are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
the "+100" button then press "2" and "5").
16 MENU button- Press to display the main menu on
the TV screen.
17 DISPLAY button- Display the counter or the current
channel number and current time on the TV screen.
(See page 16)
18 SPEED button- Press to choose the desired
recording speed:SP/SLP.
19 T-PROG. CLEAR button-Press to cancel a setting of
timer program (See page 25).
COUNTER RESET button- Press to reset counter to
0
:
00
:
00
.
20 GAME button- Sets the game mode and external
input mode at the same time. (See page 17.)
21 TIME SEARCH button- Press to activate Time
Search mode.
22 PAUSE/STILL button- Press to temporarily stop the
tape during the recording or to view a still picture
during playback.
23 MUTE button- Mutes the sound. Press it again to
resume sound.
24 CHANNEL RETURN button-Press to go back to the
previously viewed channel. For example, pressing
this button once will change channel display from 3
(present channel) to 10 (previously viewed channel),
and pressing it a second time will return from 10 to
3.
25 WAKE UP/SLEEP button-Sets the Wake up or
Sleep Timer. (See page 26.)
26 Power cord- Connect to a standard AC outlet
(120V/60HZ).
27 ANT. terminal- Connect to an antenna or cable sys¬
tem.
-
9
-
EN
8H30
Publicidad
