Publicidad
^ Set beginning hour
Press the PLAY/A or STOP/T
button until the desired hour
appears. (Example:" 7, PM" for
7:30PM)
Then, press the F.FWD/^ button.
^ Set beginning minute
Press the PLAY/A or STOP/T
button until the desired minute
appears. (Example: "30" for
7:30PM)
Then, press the F.FWD/^ button.
^ Set end hour
Press the PLAY/A or STOP/T
button until the desired hour
appears. (Example: "8, PM" for
8:50PM)
Then, press the F.FWD/^ button.
^ Set end minute
Press the PLAY/A or STOP/T
button until the desired minute
appears. (Example: "50" for
8:50PM)
Then, press the F.FWD/^- button.
^ Set the tape speed
Press the PLAY/A or STOP/T
button until the desired tape
speed appears. (Example: SP)
10 Finish setting the program
Press the F.FWD/^ or REW/^ button. The program is
now completed.
• To set another program, repeat steps [2] to [10].
• Press the MENU button to return to original mode.
11
Set the timer
Press the POWER button to set automatic timer
recording. The TIMER REC indicator lights up.
• You must turn off the TV/VCR to activate automatic
timer recording.
If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" starts flashing on
the TV screen 2 minutes before the programmed start
time.
To shift the time schedule of an automatic timer recording.
1) Press the POWER button.
2) Repeat step [1] on page 24.
3) Press the RECORD button and select the desired pro¬
gram using the PLAY/a or STOP/T button.
4) Press the RECORD button again.
Each additional push will shift forward the begin/end
time for recording by 10 minutes. When the recording is
already in progress, each additional push will shift for¬
ward Ae end time only. If you want to cancel while set¬
ting, press the PAUSE/STILL button on the remote
control. Hie recording time returns to the original time.
NOTE: When you shift forward the time schedule dur¬
ing recording, the recording speed will automatically be
set to the SLP mode.
5) Press the F.FWD/^ or REW/*^ button to exit the
setting menu. Then press the MENU button to return
to original mode.
TO CORRECT A PROGRAM
• While setting a program; press the REW/^ button
to go back one step and enter the correct numbers
using the PLAY/A or STOP/T button.
• After setting a program;
1) Press the POWER button.
2) Repeat steps [1] - [2] on page 24.
3) Press the F.FWD/^ button (or press the REW/*^
button to go back one step) until the part you want
to correct begins flashing, then make the changes
pressing the PLAY/a or STOP/T button.
4) Press the POWER button to set automatic timer
recording.
TO CANCEL AN AUTOMATIC TIMER
RECORDING
• After setting a program;
1) Press the POWER button.
2) Repeat steps [1] ~ [2] on page 24 and select a pro¬
gram you want to cancel.
3) Press the T-PROG. CLEAR button.
4) Press the MENU button to return to TV mode.
• While recording is in prepress;
1) Press POWER button.
2) Press the STOP/EJECT button on the TV/VCR.
-
25
-
EN
8H30
Publicidad
