Publicidad
TIMER
AUTOMATIC TIMER
RECORDING
You may set the TVA^CR to start and end a recording
while you are away. You can set 8 programs to record
on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE:
MAY 6th, 1999
SETTING TIME: fi-om 7:30PM to 8:50PM
CHANNEL:
CH61
TAPE SPEED:
SP
Make sure...
• Use the remote control for this procedure.
• If a cable box or satellite box is connected with the
TVA^CR you will be limited to record only one
channel. And the channel selector on the TVA^CR
must be selected to the output channel of the boxes
CH 3 or CH 4 and then the actual channel to be re¬
corded must be selected on the boxes.
• Clock must be set to the correct time and date before
setting the timer.
• TVA^CR power must be turn on to program it.
• Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
• The channel you want to record is properly set in
advance. (Seepage 13.)
Avoid over lap of programs...
There is a chance that a program will not be recorded.
when programs overlap;
• The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping
programs will begin recording in sequence.
• The illustration below demonstrates the sequence of
recordings.
Program 1
10:()0AM - 11:00AM
Program 2
9:00AM - 10:00AM
Program 3
9:30AM - 12:00PM
1
Select "TIMER PROGRAMMING"
Press the MENU button.
Confirm "TIMER PROGRAMMING" is pointed by
pressing the PLAY/A button.
And press the EFWD/^ button.
• If you have not yet set the
clock, "MANUAL CLOCK
SET" appears. If so, follow
stops [3] to [8] on page 15.
Then set the timer recording.
2
Select your desired program position (1 ~8)
Press the PLAY/A or STOP/T
button to select the desired program
position.
Then, press the F.FWD/^ button.
3
Set the channel number
Press the PLAY/A or STOP/V
button until the desired channel
number appears.
(Example: CH61)
Then, press the F.FWDy^ button.
Remember: If the TVA^CR is connected to a cable box
or satellite box, the TVA^CR must be on CH3 or CH4,
then the channel to be recorded is selected on the cable
box or satellite box.
4
Select once, every day or weekly recording
For once recording:
Press the PLAY/A (up) button
until the desired date appears.
(Example: "5/06" for May
6th).
Then,
press
the
F.FWD/^ button.
For every day recording
: To record a TV program at
the same time on the same channel every day. (Example:
Monday through Sunday)
Press the STOP/T (down)
button until "EVRY DAY"
appears.
Then, press the F.FWD/^
button.
For weekly recording
: To record a TV program at the
same time on the same channel every week. (Example:
every Monday)
Press the STOP/T (down)
button until "EVRY" and
your desired day of the week
appear together.
Then, press the F.FWD/^
button.
-
24
-
EN
8H30
Publicidad
