OHAUS FC570+R05 Manual De Instrucciones página 25

TM
Frontier Centrifuge FC5707
6.2.2 Description of the error message system
The error message "error" (M11) is shown in the "Time" (A-4) display (See figure 35). Detailed information about
possible error messages are in "table 4: error messages" (See Appendix).
7. RECEIPT OF CENTRIFUGES TO REPAIR
Health risk from contaminated equipment, rotors and accessories.
In case of returning the centrifuge for repairing to the manufacturer, please notice the following:
The centrifuge must be decontaminated and cleaned before the shipment for the protection of persons,
environment and material.
A decontamination certificate needs to be filled in and enclosed with any returned goods. (See APPENDIX)
We reserve the right to not accept contaminated centrifuges.
Furthermore, all costs occurred for the cleaning and disinfection of the units will go to the debit of the customer's
account.
8. TRANSPORT AND STORAGE
8.1 Transport
Only transport the unit in the original packaging.
Use a transport aid for transporting over longer distances to fix the motor shaft.
General transportation
8.2 Storage
During storage of the centrifuge the following environmental conditions must be observed:
in transport packaging
M11
Figure. 35
Air temperature
-25 to 60 °C
Air temperature
-25 to 55 °C
A-4
rel. humidity Air pressure
10 to 75 % 30 to 106 kPa
rel. Humidity Air pressure
10 to 75 % 70 to 106 kPa
EN-19