Installation; Environment And Clearances - SMA SUNNY TRIPOWER 60 Instrucciones De Instalación

SMA Solar Technology AG

2 Installation

2.1 Environment and Clearances

Figure 2.1 Avoid constant contact with water
Figure 2.2 Avoid direct solar irradiation
Figure 2.3 Ensure adequate air flow
Figure 2.4 Ensure adequate air flow
Figure 2.5 Mount on non-flammable surface
Installation Guide
Figure 2.6 Mount upright on vertical surface. Backwards tilt of up to
ten degrees is permitted.
Figure 2.7 Prevent dust and ammonia gases
INFORMATION
When planning the installation site, ensure that the
inverter product label and warning labels remain
visible. For detailed information, see Section 5,
page 45.
2 Installation
STP60-10-IA-xx-10 21