Publicidad
Idiomas disponibles
Idiomas disponibles
No.
Malfunction
After returning to the
Station, the robot
10
does not empty its
Dust Bin�
Auto-Empty
11
unsuccessful�
Dust leakage occurs
12
during working�
The Reservoir/Dust
13
Bin drops off�
Driving Wheels are
14
stuck�
The robot fails to
15
perform Auto
Resume�
The cleaning task is
16
not conducted at the
scheduled time�
EN
20
Possible Cause
Manually moving the robot back to the Station might not
trigger the Auto-Empty function�
In Do Not Disturb mode, the robot will not empty the dust
after returning back to the Station�
If the above possible causes have been ruled out,
components of the Station may be abnormal�
The outlet of the Dust Bin is blocked by foreign objects�
The outlet of the Dust Bin is blocked by foreign objects�
It is not properly installed�
Driving Wheels are tangled or obstructed by foreign
objects�
The robot is in Do Not Disturb mode�
The robot does not automatically return to the Station�
The schedule has been canceled�
The robot's battery is low�
The robot is in Do Not Disturb mode�
Solution
It is recommended to let the robot return to the Station on its own� Please
do not manually move it�
Turn off Do Not Disturb in the YEEDI App or manually start dust-emptying�
Please contact customer service for assistance�
Remove the Dust Bin and clear the foreign objects on the outlet�
Remove the Dust Bin and clear the foreign objects on the outlet�
Make sure it clicks into place�
Rotate and press the Driving Wheels to check for any wrapping or
obstruction by foreign objects� If any foreign objects are found, please
clean them promptly� If this issue persists, please contact customer service
for assistance�
The robot cannot perform Auto Resume in Do Not Disturb mode�
Auto Resume will not take effect if you manually move the robot back to
the Station�
Reschedule the cleaning task�
Charge it�
The robot cannot perform scheduled cleaning in Do Not Disturb mode�
Publicidad
