Dalbach UBH60-01 Instrucciones De Uso Y Montaje página 92

EN
11 Installation
11.1 Unpacking the appliance
The packaging materials must be undamaged. Inspect the appliance for transport
damage. On no account should a damaged appliance be connected to the mains
power supply. In the event of damage, please contact the supplier.
Transport the appliance only in the original packaging materials to avoid any
personal injury and/or material damage.
Removing transport protection
The appliance is secured for transport. Remove all packaging parts, plastic film
and adhesive tapes. Residues of adhesive can be removed using white spirits.
Remove all adhesive tape and packaging parts from the interior of the appliance
too.
Transport instructions
Keep the original carton and packaging mouldings in a safe place. Transport the
appliance only in its original packaging materials.
11.2 Preparing the appliance for installation
ELECTRIC SHOCK HAZARD!
The installation work and electrical may only be carried out by a
qualified electrician in accordance with all the relevant regulations and standards
applicable in your country, including the fire protection measures.
Incorrect connection can result in destruction of the power electronics.
•
The connection data on the type plate must correspond to those of the
•
mains power supply grid.
Connect the appliance only to a properly earthed plug socket with earthing
•
contact.
Page | 32