Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
The connection data can be found on the type plate and in the "Technical data"
chapter of this instruction manual.
Open the extractor hood. The type plate can be found inside the appliance.
RISK OF INJURY!
Two people are required to mount the extractor hood.
•
•
Before drilling holes in walls or ceilings, check that there are no concealed
power cables or pipes in that area.
Use only installation materials that are suitable for the condition of the
•
walls and ceilings.
Selection of the operating mode
The extractor hood can be operated in both air extraction mode (b) and in
recirculating air mode (a).
Select operating mode.
1. Push the catches of the filter grille
inwards.
2. Carefully remove the filter grille.
3. The selection knob for the desired
operating mode of the hood is visible in
the fan.
4. Turn the selection knob by 45° to the
appropriate hood operating mode.
EN
Page | 33
Publicidad
