12.1 Control panel
BUTTONS
12.2 Reduction of environmental impact
Adjust the fan speed to the intensity of the cooking vapours.
•
Pay attention to an adequate supply of fresh air during operation of the extractor
•
hood.
Observe the distance between the upper edge of the hob and the lower edge of the
•
extractor hood as indicated in the installation instructions in order to achieve the
optimum effect.
Clean or replace the filters (grease filter/odour filter) at regular intervals.
•
•
Switch off the extractor hood after the end of cooking.
On extractor hoods with run-on time, activate this function.
•
Switch off the light after the end of cooking.
•
FUNCTION
Light
Button for switching the light ON and OFF.
OFF
Button for switch the appliance OFF
Switching on
•
= low fan speed
••
= medium fan speed
•••
= high fan speed
EN
Page | 39