Descargar Imprimir esta página

Parkside PDSSAP 20-Li C3 Traduccion Del Manual De Instrucciones Originale página 25

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
Display (level)
Hot surface
Electrical devices must not
be disposed of with domestic
waste.
Symbol in case
Recess, Translation of the
original instructions
Recess, Battery
Recess, Battery charger
Recess, Cordless Impact Wrench
Recycling code
Symbols used in the instruction
manual
Attention!
General Power Tool Safety
Warnings
 WARNING! Read all safety
warnings, instructions, illustra-
tions and specifications provided
with this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools
in explosive atmospheres,
such as in the presence of flam-
mable liquids, gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify
the plug in any way. Do not
use any adapter plugs with
earthed (grounded) power
tools. Unmodified plugs and match-
ing outlets will reduce risk of electric
shock.
b) Avoid body contact with
earthed or grounded sur-
faces, such as pipes, radiators,
ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water en-
tering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Nev-
er use the cord for carrying,
pulling or unplugging the
power tool. Keep cord away
from heat, oil, sharp edges or
moving parts. Damaged or en-
tangled cords increase the risk of elec-
tric shock.
e) When operating a power tool
outdoors, use an extension
cord suitable for outdoor use.
GB
MT
25

Publicidad

loading