Publicidad
WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Latches
Taquets
Lengüetas
Tab
L
anguette
Lengüeta
Lower Plate
Plaque inférieure
Base inferior
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Tab
Languette
Lengüeta
➢ ➢ Before servicing any parts, disconnect
vacuum cleaner from electrical outlet.
➢ ➢ Place paper under nozzle whenever
lower plate is removed to protect floor
from dirt and debris that may still be
remaining in the nozzle chamber.
➢ ➢ Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
➢ ➢ Release lower plate by pressing two
(2) latches and two (2) tabs inward.
➢ ➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ ➢ Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
➢ ➢ Make sure all wires are routed
properly and not pinched.
➢ ➢ Press lower plate into place then
push two (2) latches outward.
- 28 -
Publicidad
