Nespresso BARISTA Manual Del Usuario página 13

"Add milk"
" Restart recipe "
" Empty and restart "
" Replug "
" Empty and replace whisk "
"Cooling down. please
wait..."
Specifications
BARISTA W10 / W11
US/CA: 120 V, 60 Hz, 450 W
AR: 220 V, 50 Hz, 410 W
CL: 220-240 V, 50-60 Hz, 410-490 W
MX: 127 V, 60 Hz, 505 W
2.402 - 2.480 GHz
Frequency
Max Transmit Power 4dBm
154 mm / 6.06 in
Warranty
Nespresso warrants this product against defects in materials and workmanship for a period of one year from
the date of purchase. During this period, Nespresso will either repair or replace, at its discretion, any defective
product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the
unexpired portion of the original warranty or six months, whichever is greater.
This limited warranty does not apply to any defect resulting from accident, misuse, improper maintenance, or
normal wear and tear. Except to the extent allowed by applicable law, the terms of this limited warranty do not
exclude, restrict or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the
product to you. If you believe your product is defective, contact Nespresso for instructions on where to send
or take it for repair.
Please visit our website at www.nespresso.com to discover more about Nespresso.
- There is not or not enough milk inside jug.
- Restart recipe, voltage detected as out of range.
- Whisk or motor is blocked, preparation is to thick, please emplty, refill and restart.
- Please unplug and plug again to reinitialise the device.
- Whisk or motor is blocked, preparation is to thick, please empty, refill and restart.
- One component of the device is too hot, please wait, device cool down and restart.
209 mm / 8.22 in
BR: 127 V, 60 Hz, 505 W
BR3: 220-240 V, 50-60 Hz, 410-490 W
CO: 120 V, 60 Hz, 450 W
125 mm / 4.92 in
EN
13