Publicidad
Idiomas disponibles
Idiomas disponibles
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See "Selecting the external component to use" on page 22.)
1
CD
-CH
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
2
Turn on the connected component and start playing the source.
3
28
3
Select the external component.
• If "LINE IN"* does not appear on the display, see page 22
and select the external input ("LINE IN").
*Displayed only when one of the following sources is selected
— FM, AM and tape.
to turn on the power.
1
Adjust the volume.
Publicidad
