Publicidad
Idiomas disponibles
Idiomas disponibles
GB
It is essential that instruction manual is read before
the power tool is operated for the first time.
Always keeps this instruction manual together with
the power tool.
Ensure that the instruction manual is with the power
tool when it is given to other persons.
General Safety Warnings
WARNING! Read all safety
warnings and all instructions. Failure
to follow the warnings instructions may result
in electric shock, fire and/or seroius injury.
Save all warnings and instructions
for future reference.
The term "power tool" in the warnings refers
to your mains -operated (corded) power tool
or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with
earthed(gorunded) power tools.
Unmodified plugs and matching outlets will
reduce risk of eteclric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or
wet codltions.
12
Safety Notes
Note
As our engineers are striving for the constant
research and development to develop the quality
of products, shape or structure of our model can
be changed without previous notice.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
а) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol or
medication.
A moment of inattention while operationg power
tools may result in serious personal injury.
b) Use personal protective
c) Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to power source and/or
equipment.
Always wear eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
Publicidad
