Publicidad
Idiomas disponibles
Idiomas disponibles
recycled in an environmentally friendly manner.
Würth will gladly take back your defective Würth
power tool free of charge.
Noise and Vibration Emissions
1. Noise and vibration
Noise emission values determined according to
EN 62841
A weighted emission sound pressure level (LpA)
[dB(A)]
A weighted emission sound power level (LwA)
[dB(A)]
Uncertainty (K) [dB(A)]
2. The operator to wear hearing protection
3. Vibration emission
Vibration total values(triaxial vector sum)
determined according to EN 62841
Vibration emission value (ah)
Impact drilling
[m/s
2
mode
Uncertainty (K) [m/s
Vibration emission value (ah)
[m/s
Drilling mode
2
Uncertainty (K) [m/s
4. The following information
• The declared vibration total value has been
measured in accordance with a standard test
method given in EN 62841 and may be used for
comparing one with another.
• The declared vibration total value may also be
used in a preliminary assessment of exposure.
5. A warning
• The vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the tool is used.
• Identify additional safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
16
]
]
2
]
]
2
Specifications and List of Contents
1. Specifications
Rated input
Rated voltage
& Frequency
Motor
no load speed
115
Impact rate at
rated speed
104
Weight
3
Drilling
Concrete
diameter
(max
Steel
Ømm)
Protection Class
2. List of Contents
24
Plastic box
1.5
Side handle
Stopper
3
Instruction Manual
1.5
3. Parts available additional: Side handle,
Drill bit (ø ± 3.2 mm), Carbon brush
• Optional parts (Available additionally)
a) Drill bit (Impact + rotation)
Outer diam-
eter (mm)
6.5
9
9.5
b) No.3 (+) bit (Length: 70 mm, 6 ~ 8 mm cross
recess (+) screw)
c) Screwdriver bit (for minus recess [-] screw)
A
A(mm)
W
650
220-240 V ~ ,
V
50/60Hz
Single phase series
-
commutator series
motor
/min 0-2800
/min 0-44800
kg
1.65
mm
13
mm
10
-
Class II
Outer diam-
Length (mm)
eter (mm)
100
10
100
12
120
-
Length of a screw
0.8
1
1 EA
1 SET
1 EA
1 EA
Length (mm)
120
120
-
4
5 ~ 6
Publicidad
