COFFEE DISPENSING
Make sure that the switch-on/supply button lights up to a
steady white light.
Never put fingers or objects in the capsule-holder.
Only compatible capsules must be introduced in the
capsule-holder.
Single-dose capsules are prepared to dispense one
coffee/product. DO NOT use the capsules more
than once. Inserting two or more capsules can cause
the machine to malfunction.
To always have a coffee at the perfect temperature,
it is recommended to preheat the cup with hot water.
Position the cup under the dispensing spout without in-
serting the capsule. Press the switch-on/supply button to
supply hot water enough to pre-heat the cup.
Place the cup under the coffee dispenser for a classic
espresso.
PREPARING THE COFFEE
27
Remove the drip tray to use cups of different sizes for a
long coffee.
If, during the dispensing cycle power supply is interrupted
or water is exhausted within the tank proceed as follows:
- Restore the power supply or fill the water tank up to the
indicated MAX level.
- Press the switch-on/supply button and wait for the but-
ton to light up to a steady white light.
- Replace the capsule inside the capsule fitting compart-
ment with a new one.
- Restart the coffee dispensing.
After 5 supplies the power-on/coffee supply button starts
blinking fast with white light to indicate that the spent
capsule drawer is filled. Empty the spent capsule drawer
and press the button to reset the coffee machine. Now the
machine is ready for a new supply.
E N