Never use solvents, alcohol or other aggressive sub-
stances or ovens for drying the coffee machine com-
ponents. Wash machine components (electric com-
ponents excluded) with cold/lukewarm water and
non-abrasive clothes/sponges.
All removable components can be cleaned by using a
dishwasher.
Do not leave water in the tank and water circuit for
more than 3 days. If this is the case, drain the tank and
circuit, rinse it and refill it with fresh water, then carry
out a delivery without capsule before making any cof-
fee or other beverage.
CLEANING THE USED CAPSULE DRAWER
AND THE DROP COLLECTING DRAWER
The switch-on/supply button will light up to a quick blinking
The switch-on/supply button will light up to a quick blinking
white light
white light
when the used capsule tray is full and, there-
fore, has to be emptied and fitted back into place again.
Regularly verify that the used capsule collecting drawer
and the drop collecting drawer will not be full, to avoid
machine malfunctions and
MAINTENANCE AND CLEANING
damage.
The used capsule collecting drawer and the drop col-
lecting drawer should be emptied and cleaned after
making coffee 4/5 times or every two/three days
Take off the drip tray and remove the drip tray grill.
Remove and empty the used capsule collecting drawer.
Clean and dry all parts before putting them back.
COFFEE DISPENSER CLEANING
To clean the dispenser, perform a weekly COFFEE
BREWING procedure without inserting the capsule.
29
E N