LAVAZZA A MODO MIO Jolie Instrucciones De Uso página 31

Press the switch-on/ stand-by/ supply button
supply one cup (approximately 2 fl oz /60 ml) of des-
caling solution. Allow the descaling solution to work for
about 15-20 seconds.
During breaks, empty the container used to collect the
solution.
Repeat the steps described in points
water tank is completely empty.
Proceed with the rinsing cycle.
MAINTENANCE AND CLEANING
then
and until the
Rinsing cycle
Remove the water tank, rinse and wash it accurately.
Fill it with drinking fresh non-carbonated water up to
the MAX level.
Fit the tank with the fresh water back into the machine.
Place a suitable container under the spout.
Press the supply button
of the tank.
Empty the container and place it again under the dis-
penser.
Upon completion of the rinsing cycle, perform one
more rinsing cycle.
Remove the water tank, rinse and wash it accurately.
Fill it with drinking fresh non-carbonated water up to
the MAX level.
Put the tank back in place on the machine.
Clean the machine by means of a moist, soft cloth.
After cleaning the machine, the descaling process will
be over. The machine will be ready for use.
31
E N
then supply the full content