Publicidad
Idiomas disponibles
Idiomas disponibles
Pulse oximeter
FR
IT
DE
PT NL
PL
DK
ES
EN
SWE
6. OPERATING GUIDE
6.1. Application Method
6.1.1. Connect the probe well according to the method introduced in chapter 5.3, then put the
finger into the probe. Refer ro Figure 5.
A. Long press the "power button", until the device is turned on.
B. Do not shake the finger and keep the patient in a stable state during the process.
C. The data can be read directly from the screen in the measure interface.
Fingernails and the luminescent tube should be in the same side.
If the alarm function is on, the device will provide medium-priority alarm signal when probe or finger is out.
Intermittent alarm will occur and the user interface presents "FINGER OUT". Medium priority indicating that prompt
operator response is required.
6.1.2. Pause alarm
Figure 5.
A. Alarm including the alarm of measure data going beyond the limits, the alarm of low-voltage, the alarm of finger out.
B. When alarm is on, short press the "power button" can pause the alarm, it can renew alarm after period of time, alarm
pause time can be set by menu.
C. Only alarm sound can be closed,the prompt information displayed can't be closed.
6.1.3. Menu operations
In the measuring interface, press the "menu button" can enter the main menu interface of Figure 6.
Figure 6. Main menu interface
26
Publicidad
