Mobiclinic CMS60F Manual De Instrucciones página 28

Pulse oximeter
FR IT DE PT NL PL DK
ES EN SWE
Move the choice bar to the menu item that you want to set, and press "right button" to begin to set .Press "menu button"
for affirming.After resetting time,press "return button",and the prompt information whether to affirm setting will appear
The interface will return to main menu after choosing.
C. System setting
In the main menu interface, move the choice bar to the "System" item, then press the "right button" to enter the System
setting menu as Figure 9:
Figure 9. System setting menu
a. In "System Menu" interface,move the choice bar to the "Version" item,then press the "right button" to see the edition
information of hardware and software.
b. In "System Menu" interface,move the choice bar to the "Equipment ID" item,then press the "right button" to see the ID
information of device.The ID of the device can be set by the PC software. Please refer to <SpO2Assistant user manual>
for detail.
c. Move the choice bar to the "Memory Manager" item,then press the "right button" to enter"Select ID" interface as
Figure 10.Select the patient ID that you want to delete,then press menu button to delete the patient ID and storage
data.
Figure 10. Select ID interface
d. In "System Menu" interface,move the choice bar to the "Factory Default" item and press the "right button" to choose
"Yes",then press menu button,and the device will resume leave-factory state.
e. In "System Menu" interface,move the choice bar to the "Volume" item, then you can set the volume of voice.
f. In "System Menu" interface,move the choice bar to the "Pause Time" item, then you can set the pause time
of alarm.The default of pause time is 60 seconds,and press the "right button" to adjust the pause time of alarm.
28