Publicidad
Idiomas disponibles
Idiomas disponibles
Pulse oximeter
FR
IT
DE
PT NL
PL
DK
ES
EN
SWE
c. In "Input ID" interface,press direction key to choose the existent ID for data storage, here the ID input box will turn to
blue,at the same time there will be a red choice box on the first ID in the ID listing as Figure
13. Press direction key to move the red choice box to the ID which is wanted to choose, then press menu button, here
prompt information whether to erase the storagedata for this ID will appear.Choose "Yes" to erase the ID data, at the
same time begin to record and return to the measure interface;choose "No" to return the "Input ID" interface.
Figure 13. Choose existent ID
d. Every patient ID could save 24-hour data,the device could save 16 patient ID.
e. In the record state, whatever interfaces the device is in(measure interface, menu interface,clock interface) , if there is
no operation in 30 seconds,the display screen will closed automatically.If pressing power button,the device will return
the measure interface.
f. After the display screen closes automatically, the pulse sound will close automatically too for saving electricity under
record state.
F. Demo function setting
In the main menu interface, move the choice bar to the "Demo" item,then press the "right button" to turn on demo mode.
G. Review function setting
In the main menu interface,move the choice bar to the "Review" item,then press the "right button" to choose review
mode.There are two review mode of value and trend. Under value review mode as Figure 14,press "left button" or "right
button" to page up or page down,press "up button" or "down button" to page up or page down quickly.The displayed
time on the right top is the total recording time.
Figure 14. Value review mode
30
Publicidad
