PawHut D00-158V00 Instrucciones De Montaje página 3

Rear wheel seat
Iron gasket
Rear wheel
3.Use of rear wheel:
Insert the iron gasket, rear wheel seat, and rear wheel into both sides of the rear
wheel bearing in turn, then fasten the white buckle, the black buckle and the rear
wheel cover in sequence on the outer shaft hole of the rear wheel, and then
assemble for the rear wheel set, put the rear wheel set on the rear wheel tube, and
you can hear the "Click". When it needs to be disassembled, press the buckle on
the rear wheel seat and pull it out downwards.
Press down the brakes on both sides, the brake works. Conversely, it can be
released.
4.Usage of top carrier
As shown in the picture, press the iron support around, hold up the basket, and then
put in the cotton pad. Zip up.Put the top carrier into the upper part of the frame.
The rear bottom can be fixed with burrs. If you need to remove it, perform the
reverse operation.
5.Usage of bottom carrier
Hold up the bottom carrier same with top, and then put the carrier to lower part of
the frame.
The front rear bottom can be fixed with burrs. If you need to remove it, perform the
reverse operation.
Rear wheel axel
Rear wheel cover
Black buckle
White buckle
2
Rear wheel
brake