Beurer HT 80 Instrucciones Para El Uso página 17

4. DEVICE DESCRIPTION
1
Unlock button
2
Curling brush for waves and curls
3
Heated brush for volume, body and
bounce
4
Air outlet
5
Rotation buttons
6
Sliding switch for blower and tempera-
ture settings
2 = High air flow, high temperature
1 = Gentle air flow, medium temperature
= Cold air setting
5. INITIAL USE
Warning
• Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Make sure that your hands are dry! There is a risk of electric shock!
• The heated brush [3], the curling brush [2] and the device may become very hot depen-
ding on the switch setting and period of use – risk of burns and fire! Do not touch the
heated brush [3] or the curling brush [2].
• Place the device on fireproof surfaces only. Risk of fire!
• Ensure that no hair can be directly sucked into the device. Risk of fire!
Important
• Do not jam the mains cable [11] in drawers or doors, for example.
• Untangle the mains cable [11] if it is twisted.
• Do not pull, twist or bend the mains cable [11] and do not pull or route it over/on sharp,
pointed objects or hot surfaces.
Note
A slight odour initially develops after switching on the device for the first time. This is nor-
mal and not harmful to your health. Allow the device to run for three to five minutes. After
that you can use the device as normal.
• For your safety, the device switches o automatically if it overheats.
• Pull the mains plug out of the socket and allow the device to cool down.
• Before switching the device back on, check the air outlet [4] and the air intake filter [8]
for any blockages (e.g. sucked-in flu , dust or hair).
7
Handle
8
Air intake filter
9
360° swivel joint
10
Anti-kink protection with hanging
eyelet
11
Mains cable
17