Beurer HT 80 Instrucciones Para El Uso página 20

7. CLEANING AND MAINTENANCE
Important
• Always pull the mains plug out of the socket before cleaning the device. Risk of elec-
tric shock!
• Ensure that no water gets inside the device! Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in the dishwasher.
• Do not use any aggressive, caustic, abrasive, or corrosive cleaning products or hard
brushes.
• The casing of the hot air brush and the attachments may be cleaned with a soft cloth
dampened with warm water.
• Before each use, remove any sucked-in flu , dust or hair from the air outlet [4] and the
air intake filter [8] using an appropriately sized brush.
• If the curling brush [2] and the heated brush [3] are very dirty, remove from the device
and rinse thoroughly under running water.
• Dry the curling brush [2] and the heated brush [3] carefully after cleaning!
• Do not use the attachments again until they are completely dry.
8. DISPOSAL
For environmental reasons, do not dispose of the device in the household waste
at the end of its useful life. Dispose of the unit at a suitable local collection or re-
cycling point. Observe the local regulations for material disposal. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic
Equipment). If you have any questions, please contact the local authorities responsible
for waste disposal.
9. TECHNICAL SPECIFICATIONS
Model:
Weight:
Voltage supply
Power consumption
Protection class
Ambient conditions
Permissible temperature range
Subject to technical changes.
10. WARRANTY
Further information on the warranty and warranty conditions can be found in the warranty
leaflet supplied.
HT 80
Handle: 416 g, heated brush: 78 g,
curling brush: 93 g
220-240 V~, 50-60 Hz
800 – 1000 W
II
Only approved for indoors
-10 to +40 °C
20