Publicidad
Idiomas disponibles
Idiomas disponibles
6. Turn the motor unit 2 such that the at-
tachment marking
unit points to the lock marking
The motor unit 2 must engage noticea-
bly.
5.3 Beater
Mount the beater (Figure A)
1. Attach the motor unit 2 to the beater
adapter 4 such that the attachment
marking
16 is below the symbol
15.
2. Turn the motor unit 2 such that the at-
tachment marking
unit points to the lock marking
The motor unit 2 must engage noticea-
bly.
3. Attach the beater 6 to the beater adapt-
er 4 until it engages audibly and notice-
ably.
5.4 Remove the accessory
part (Figure A)
• To remove the accessory part, turn the
motor unit 2 such that the attachment
marking
16 points to the delock
marking
15 and pull off the motor
unit 2 from the accessory.
56 GB
6. Operation
16 on the motor
15.
16 on the motor
15.
WARNING!
6.1 Operating times
We recommend the following operating
times for the three applications:
-
-
-
DANGER! Risk of injury from
cutting!
Never reach into the rotating blades.
Do not touch rotating parts with spoons
or similar utensils. Keep long hair or
loose clothing away from rotating parts
as well.
Only switch on the device when the
blender 10 is immersed in the foodstuff.
The blade continues to rotate after the
device is switched off. Wait until the
blender 10 stops moving before you
take it out of the food.
The device is designed for a maximum
operating time of 2 minutes without in-
terruption (see "Operating times" on
page 56).
In order to prevent damage to the de-
vice, interrupt the blending process im-
mediately if the blade is either turning
with difficulty or not turning at all. Pull
out the mains plug 1 and check whether
there is something in the bowl blocking
movement or whether the food is too
tough. Also check whether the device is
assembled correctly.
Blender up to 1 minute without inter-
ruption, then 2 minutes break
Chopper up to 1 minute without inter-
ruption, then 5 minutes break
Beater up to 2 minutes without inter-
ruption, then 2 minutes break
Publicidad
