Publicidad
Idiomas disponibles
Idiomas disponibles
C
C
Problem
There is a heavy build-up of
frost on the door seal.
Unusual noises
There is water on the floor.
If the malfunction reappears, contact a repair centre.
This information is necessary in order to be able to help you quickly and correctly.
Enter the required information here (see rating plate).
Changing the Light
This product contains a light source of energy efficiency class G.
Light source in this product can only be replaced by qualified professionals.
Please contact after-sales service if the light source fails.
The light source shall be removed at the end of the product's useful life, with sorting and
recycling done separately.
Practical information
Possible cause
The door seal is not airtight.
The appliance is not level.
The appliance is touching
the wall or other objects.
A component (for example
a pipe) on the back of
the appliance is touching
another part of the
appliance or the wall.
The water drainage hole is
clogged.
15
15
Carefully warm the leaking
areas of the door seal with
a hair dryer on the cold
setting. At the same time,
change the shape of the
heated door seal by hand so
that it sits properly.
Adjust the feet again.
Move the appliance slightly.
If necessary, gently bend the
component to release it.
See the "Cleaning and
maintenance" chapter.
EN
Solution
Publicidad
