Publicidad
Idiomas disponibles
Idiomas disponibles
USA : If this troubleshooting does not resolve the issue, before consulting the retailer or
returning the product, please telephone Rowenta Consumer Services at 1-800-769- 3682.
Further hints ans tips are obtainable from our homepage www.rowentausa.com
Canada : If you are unable to trace the cause of the fault, contact an official
Rowenta Customer Service Center. The addresses are shown in the enclosed service
center address list. Further hints and tips are obtainable from our homepage:
www.rowenta.ca
Mexico : If you are unable to trace the cause of the fault, contact an official
Rowenta Customer Service Center. The addresses are shown in the enclosed
service center address list. Further hints and tips are obtainable from our
homepage: http://www.rowenta.com.mx
IS THERE A PROBLEM?
Problems
The steam station does
not switch on or the iron
indicator and ON/OFF
indicator do not switch on.
Water runs through the
holes in the soleplate.
Water streaks appear on
the linen.
White streaks come
through the holes in the
soleplate.
Brown streaks come
through the holes in the
soleplate and stain the
linen.
Possible Causes Solutions
The appliance is not
switched on.
You use steam too
frequently when your iron
is not hot enough.
Water has condensed in
the pipes because you are
using steam for the first
time or you have not used
it for some time. you have
not used it for some time.
When taking a break from
ironing, if your ironing
board cover is soaked with
water it is not suited to the
power of a steam station.
Your boiler has a build-up
of scale because it has not
been rinsed out regularly.
You are using chemical
descaling agents or
additives in the water for
ironing.
13
Check that your appliance is correctly
plugged in and press the illuminated on/
off button.
Wait for the thermostat light to go out
before activating the steam trigger.
Adjust the frequency of use of the steam
trigger to match the position of the
thermostat (see § 6).
Press on the steam trigger away from your
ironing board until the iron produces steam.
Check that your ironing board is suitable.
A mesh type ironing board must be used
avoid condensation.
- Rinse the collector when the "Calc Away
OK button" indicator flashes.
- Rinse the boiler twice a year.
If your water is very hard, rinse it more
often.
Never add this type of product to the water
tank (see § 2).
Contact an Approved Service Centre.
EN
Publicidad
