UFESA AF2850 fryin' free Manual De Instrucciones página 19

BEFORE ITS FIRST USE
1. Remove all packing materials and stickers from the inside and outside of the Air Fryer. Gently wipe
down exterior with a damp cloth or paper towel.
WARNING: Never immerse the Air Fryer or its plug in water or any other liquids.
2. Pull the basket handle to remove the basket from the Air Fryer. Use the tray handle, in the center of
the tray, to remove the tray. Use a sponge and warm, soapy water to wash the inside and outside of the
basket and tray. The basket and the tray are top-rack dishwasher safe.
3. WARNING: Do not use abrasive cleaning agents or scouring pads.
4. Dry thoroughly.
CONTROL PANEL
A: Menu button: There are 6 function programs: French fries, meat, fish, chicken, bake and shrimp. The
buttons are tactile with a white LED light below each button
In preparation or pause mode, the program that is selected will flash and the rest of the menus will
remain lit. Program selection can only be changed in this mode, and cannot be changed when a
program is in use. In work mode, the current function menu LED will stay on while the other menu
lights will be o .
B: Temperature indicator light (white LED light): When in the temperature setting mode, the indicator
will light up.
C: LED digital display: displays temperature and operating time.
When the air fryer is operating, the temperature and time will be displayed with an interval of 5
seconds.
In the setting process, press the time / temperature setting button once to display the temperature.
Press the time / temperature setting button again to display the time.
D: Temperature indicator light: The unit is in Celsius degrees. When the temperature is set, this light will
be on.
E / K: "+/-" button: in the time setting mode, pressing up or down will increase or reduce 1 minute. In
the temperature setting mode, this button will increase or reduce the temperature in 5ºC with every
press. A long press will increase or reduce the heat quickly.
F: " " button: When the machine is plugged in and in standby mode, the LED will appear in red color.
To start the air fryer, press the button and the LED will turn into white and the buzzer will emit a beep.
The full screen icons will light up, and the digital screen will display the initial default temperature.
Touch this button for 3~5 seconds in working mode to exit the frying mode and the buzzer will emit 1
"beep" for entering into the standby mode. When the time is over, the fan will run on its own for 20
seconds and then the buzzer will emit 5 "beep" sounds for entering into the standby mode.
G: Time indicator.
L: Time/temperature setting button: The default mode will show the temperature display. Press the
button to switch between modes and select the desirable time or temperature by pressing the up or
down buttons.
J: Time indicator.
H: Work in progress indicator: When the device is operating, the indicator lights will cycle from left to
right and the time interval between the two lights will be 0.5 seconds. The indicator light stays on in the
pause mode or the indicator light stays o in standby mode.
Z: "Start/Pause" button: In the "ready" mode, the light will remain white. Touch this button in the
preparation mode to enter the working mode of the selected menu and the buzzer will beep once. In
working mode, press this button and the buzzer will beep once, the heating tube will stop working, and
the indicator light will flash. At this time, you can select and change to other function menus.
After changing the cooking program, click the "Start/Pause" button, the buzzer will beep once and the
device will resume work. At this time, the indicator light of the "Start/Pause" button will return to a long
light state.
In working mode, press the "start/pause" button and the product will enter into pause mode. If there is
no operation in 3 minutes the product will stand by in sleep mode.
19