Technical Assistance Service - S&P CB-2005 Manual De Instalación. Instrucciones De Uso

- Remember to put it back again afterwards.
- Eliminate any other possible reasons for overheating (e.g.: obstructions in front
of the air inlet/outlet grilles, build-ups of dirt).
- Turn on the fan heater again and check it works correctly.
• If the product needs servicing, call in a qualified specialised technician.
MAINTENANCE
• IMPORTANT: BEFORE CONDUCTING ANY MAINTENANCE OR CLEANING EN-
SURE THAT THE APPLIANCE IS DISCONNECTED FROM THE MAINS ELEC-
TRICAL SUPPLY.
• The S&P CB range of Heaters Do Not Require any special maintenance. To en-
sure long and trouble free operation we do however recommend that the intake
and exhaust air vents are periodically checked to ensure there is no build up of
dust and debris. TIP: With the appliance switched OFF, use a vacuum cleaner to
remove any dust or debris from inside the air vents.
• To clean the appliance simply wipe with a damp (not wet) cloth. Do Not Use any
abrasives or solvents.

TECHNICAL ASSISTANCE SERVICE

• All CB Wall Mounted Heaters are offered with a comprehensive guarantee and
Technical Assistance Service. If the appliance is found to be defective within the
period of guarantee then first please contact the Technical Assistance Service,
then only if neccessary return to an authorised S&P supplier.
• IMPORTANT: Any repairs or work carried out on the appliance by person(s) not
authorised by S&P will invalidate the guaranttee.
Soler & Palau reserves the right to alter specifications without prior notice.
15