Suavinex N6T Folleto De Instrucciones página 15

• If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or other similarly qualified person in order to avoid a hazard.
PRECAUTIONS
• Wash your hands well before handling your baby's products and food.
• Always use the appliance on a stable and even surface.
• Do not place the appliance near a heat source, hotplates, etc.
• Do not move the appliance or cover it when in use.
• Before preparing a bottle, consult a healthcare professional or your
pediatrician for further information about food safety and preparation (water
to use, storage, preparation method, etc.).
• Also refer to the instructions supplied with your milk for any specific
recommendations.
• The temperatures indicated are for information purposes. Before feeding
your baby, check the temperature of the food by pouring a few drops onto
the inside of your wrist.
• You can stop the cycle at any time by pressing again on the ON/OFF button
or other button, but you can't restart the cycle after stopping it.
COMPONENTS
PRODUCT :
Lid
1
Lift-out basket
2
Bottle warmer body
3
Control panel
4
PROGRAMS OPERATION
STARTING UP OF APPLIANCE
1. Plug the appliance into an earthed 220-240V socket.
2. Before the 1st use, it is recommended to launch a Steam fast cycle for 5 min
CONTROL PANEL :
Temperature indicator
a
Time indicator
b
Setting button +/-
c
Water bath mode button
d
Baby jar mode button
e
Sterilize mode button
f
Defrost mode button
g
Steam fast mode button
h
ON/OFF button
i
15