Suavinex N6T Folleto De Instrucciones página 19

1. Pour water into the bottle warmer (level max)
2. Place the bottle and lift-out basket into the bottle warmer.
3. Press the ON/OFF button.
4. Press the Water Bath mode button.
5. When the temperature indicator flashes, press the setting button +/- to
choose the temperature as you wish (22°C-42°C). The default temperature
is 37°C.
6. If you want to customize warming time, press again the Water Bath mode
button. When the time indicator flashes, press the setting button +/- to
choose the working time (1-59 mins, 1-3 hours). The default time 30min.
7. The bottle warmer will start working after the temp/time indicator flashes
twice. The Water bath mode button keeps flashing. The control panel shows
the real time water temperature while the product is working.
8. When the desired temperature is reached, the appliance beeps 5 times
and then switches to keep-warm mode until the selected time has elapsed.
Note: it takes about 20-25 minutes in bain-marie mode for the bottle to reach
the desired temperature.
BE CAREFUL, RISK OF BURNING
temperature of the milk is not too high and that there is no risk of burning
your child.
Note : After preparation ,the bottle should be consume within 30 min. Discard
any unfinished baby bottle, and do not reheat a second time.
DEFROST MODE
The Defrost mode is used to defrost gradually the frozen breast milk until it
arrives at the desired temperature (22°C-42°C). This preserves the nutrients,
proteins and antibodies of breast milk.
1. Pour water into the bottle warmer (level max).
2. Place milk storage bag and lift-out basket into the bottle warmer.
3. Press the ON/OFF button.
4. Press the Defrost mode button.
5. When the temperature indicator flashes, press the setting button +/- to
choose the temperature as desired (22°C-42°C). The default temperature
is 40°C.
6. If you want to customize warming time, press again the Defrost mode button.
When the time indicator flashes, press the setting button +/- to choose the
Always check that the
19