Suavinex N6T Folleto De Instrucciones página 20

working time (1 -6hours) . The default time is 2 hours.
7. The bottle warmer will start working after the temp/time indicator flashes
twice. The Defrost mode button keeps flashing. The control panel shows the
real time water temperature while the product is working.
8. The bottle warmer will beep 5 times at the end of countdown.
BE CAREFUL, RISK OF BURNING
temperature of the milk is not too high and that there is no risk of burning
your child.
Recommendations* for warming time in hours (only for Defrost mode) :
Initial
Container
temperature
Plastic
Frozen
portion
Storage bag Frozen
* These recommendations are based on the test with the use of the SUAVINEX
portions and the default temperature at 37°C. The warming time above
includes already the time needed to defrost and to reheat the milk to 37°C.
Note :
Check the instructions of your milk storage bag and make sure that it can be
reheated in the bottle warmer.
Heating time varies with different brands of containers and materials. The
volume of baby milk to be heated has also a significant impact. If the baby milk
is not hot enough, put it back in the appliance and restart the mode to heat
again for few minutes.
STERILIZE MODE
The Sterilize mode is used to sterilize baby bottles or pacifiers,
1. Pour 100-150ml water into the bottle warmer.
2. Place the lift-out basket into the bottle warmer first, then put the bottle and
nipple upside down into the bottle warmer.
3. Always check that the water volume doesn't exceed the maximum line.
4. Put the lid on.
Volume of milk
60 ml 90 ml
1h 1h15
1h 1h30
20
Always check that the
120 ml 150 ml
1h 2h
2h 2h30