HIKOKI N 1804DA Instrucciones De Manejo página 19

PROBLEM
Drives too deep.
Skipping staples.
Intermittent feed.
Staples jam.
Driven staple is bent.
The battery remaining power on the
machine does not match the battery
with the remaining battery indicator.
CHECK METHOD
Check position of stapling depth
adjustment adjuster.
Check for proper staples.
Staple feeder damaged?
Feed spring weakened or damaged?
Driver blade worn or damaged?
Check for proper staples.
Driver blade worn or damaged?
―
19
CORRECTION
Readjust according to Fig. 15, 16.
Use only recommended staples.
Replace staple feeder.
Replace feed spring.
Contact HiKOKI for replacement.
Use only recommended staples.
Contact HiKOKI for replacement.
Refer to the indicator lamp on the
battery.
English