BGS technic 9942 Manual De Instrucciones página 7

COMPONENTS
1 Ignition switch
2 Filler valve
3 Gas window level
4 Flame regulator
A Internal thread for soldering tips
(5 pcs.) and seat for deflection sheet
B Hot blow head
OPERATION STEPS (For solder & blower function)
Screw on solder head as shown in the photo.
Use pure Butane gas to refill from bottom valve.
Note: This Soldering Iron does not contain butane gas when first
purchased.
After refilling, wait 3-5 min to have gas to stabilize.
Turn the flame regulator from
left (-) to right (+)
Push forward the trigger
SLOWLY.
Hold the trigger 5-10 seconds to
heat the catalyst.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed