Descargar Imprimir esta página

Grohe SENSIA 36507SH0 Manual De Instalación página 12

Ocultar thumbs Ver también para SENSIA 36507SH0:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Do not install this product in a wet or
damp location, such as inside a
shower room or steam room, as this
may lead to electric shock or fire.
Do not attach the product to any
water source other than potable
water.
It may cause electric shock, fire and
skin inflammation due to corrosion of
electronic parts inside the seat unit.
Do not use loosen the socket.
It may cause electric shock or fire.
Make sure that the power supply is
earthed.
Failure to do so will result in danger
of electric shocks if a malfunction or
electric leakage occurs.
Consult authorised and qualified
electricians if the power supply is not
earthed.
Do not place fire source such as
cigarettes near this product.
Failure to do so may cause fire.
Make sure that the building in which
the product is to be installed has an
earth-leakage circuit breaker.
CAUTION
Install a high-sensitivity, high-speed
earth-leakage circuit breaker (with
rated current value of 15 mA or
below) on the primary side of the
power supply.
There is a danger of electric shock.
The toilet bowl is made of ceramics,
and ceramics are fragile. Note the
following when handling the toilet
bowl:
– Prior to installation, make sure that
the toilet bowl is in a good condition
and not damaged.
– After installation, check the toilet
bowl for any damages.
Failure to do so may cause injury, or
water leakage and/or flooding.
Wash out foreign materials or rust
inside the pipes before connecting
the product.
Failure to do so could damage the
internal parts of the product, which
may cause water leakage and/or
flooding.
Note the following when using the
strainer:
– Close the water shutoff valve when
removing the strainer.
– When installing the strainer, tighten
it fully so there is no gap.
– Check that the O-ring is free of
foreign materials when attaching it.
If foreign material is stuck to the
O-ring, it may cause flooding due to
water leakage.
Adjust the water shutoff valve and
check for water leakage after
installation.
Otherwise, water leakage and/or
flooding could occur.
If you expect the water to freeze,
drain the water out of the product
before handing it over to the client.
Failure to do so may cause fire,
water leakage, and/or flooding due to
damage from freezing.
Drain the air from the pipes after any
building construction or renovation,
or when the water supply is restored
after an interruption.
If the water supply contains air, it
may cause damage or malfunctions
to the product or pipes. There is a
danger of injury or damage to the
building or furniture due to flooding.
Use the new water supply hose
assembly that comes with the
appliance. The old hose assembly
cannot be reused.
8
GB

Publicidad

loading

Este manual también es adecuado para:

Sensia 36508sh0Sensia 36509sh0Sensia 14533sh0