Grohe SENSIA 36507SH0 Manual De Instalación página 13

Power supply
• Use an AC 230 V power supply with a consumption
rating of 920 W. Max. 1300 W.
• The length of the power cord is 0.6 m.
The power cord must be connected to the 3+PE
(protected earth) plug far away from the water area.
• Electrical installation work must only be performed
by a qualified electrician. This work must be carried
out in accordance with the regulations of IEC
60364-7-701 (corresponding to VDE 0100 Part 701)
as well as all national and local regulations.
• The device must be connected to a properly earthed
outlet.
Water supply
• Only use potable water as the water supply.
Using a different water supply (industrial water, well
water, etc.) may cause the durability of the electrical and
mechanical components to deteriorate, resulting in an
accident or malfunction.
• Please firmly fix the water supply pipe.
Water pressure
The minimum water pressure must be 0.05 MPa
(0.5 bar) [flow pressure]. The maximum water pressure
is 1.0 MPa (10.0 bar) [hydrostatic pressure].
Please observe this pressure range in your installation.
Minimum installation clearance
For the required minimum installation clearance, refer
to Figure 1.
A space of 70 mm or more on each side of the product is
recommended.
Figure 1
9
GB
Installation information
• If a toilet from another manufacturer is already fitted,
concealed water connection fitting may be possible.
However, the connection dimensions need to be
identical. Products are sometimes fitted with an
information sticker with the dimensions on the protective
plate underneath the actuator plate.
• The automatic flush kit can only be installed for Grohe
flush systems with GD2 cisterns.
Technical data
Rated voltage
220 - 240 V (AC), 50-60 Hz
Rated power consumption
920 W (environment 20 °C, water 15 °C)
Maximum power consumption
1300 W
Length of the power cord
0.6 m
Waterproof grade
IPX4
Standby
0.9 Watt
Protection class 1
EN13077-type AB,
EN997-CL1-5A+CL2
Water connection cross section
3/8 in
Operating temperature range
0 °C - 40 °C
Units
V = volt, Hz = hertz, W = Watt, m = metre,
MPa = megapascal, in = inch, °C = degrees Celsius
Flushing water volume
Europe: full 5 L, light 3 L
Unit: mm