Grohe SENSIA 36507SH0 Manual De Instalación página 16

Testing
Cover the seat sensor with a wet piece of rag or paper
and place the spray hood under the toilet seat.
Switch the power of the E-bidet (seat unit) to on
( | ). Then bring remote control near to the toilet and
pair the remote control with the shower toilet.
Press and hold the "power" button on the back of
the remote for 2 seconds to power on.
Press and hold the "stop" button on the front of
the remote control for more than 3 seconds. The
remote control and the smart toilet have been
successfully paired when the front LED flashes
3 times.
Confirm that water sprays for rear and front washing.
Remove the spray hood.
Press the "dryer" button and check if it works properly.
Attach the banderole to the seat lid.
12
GB